Wind Crest VEN150E User Manual

Wind Crest Fans

Install Quick Specs are for planning purposes only. Please refer to the detailed installation
instructions, prior to making any cutouts.

Externally Mounted Ventilators – Install Quick Specs

VEN150E

Installation Type & Discharge Direction
Mounted outside. Can be mounted on exterior
roof or wall.

CFM Rating

1500 CFM

Minimum Duct Size
10” round

Maximum Equivalent Straight Duct Length
50 feet

Equivalent Straight Lengths
• 1 foot of 8” or 10” duct = 1 foot

• 1 foot of 3 ¼” x 14” rectangular = 1 foot

• 8” round 90 degree Elbow = 5 feet
• 10” round 90 degree Elbow = 3 feet

• Wall or Roof Cap = 2 feet

Standard

Features

• Adaptable to all Wind Crest hoods

• Weather-resistant glavanized steel

construction

• Thermally protected, permanently

lubricated motor

• Dynamically balanced 12” diameter blower

wheel

• Neoprene resilient anti-vibration mounted

• Built-in Flashing plate for roof or wall mount

• Easily removed blower cover for periodic

cleaning

Ventilator Motor Ratings*
Hoods without Heat Lamps:
12.0 Amps @ 120 V AC, 60 Hz
Hoods with Heat Lamps:
16.4 Amps @ 120 V AC, 60 Hz

*20 Amps @ 120 V AC, 60 Hz required when
using VEN150E ventilator.

Ventilator Carton Weight:
VEN150E = 80 lbs.

30"

LISTED 7Z66 C

VEN150E