Check that all burner valves are off, Connect flexible hose to manifold – weber 1100 User Manual

Page 16

Text mode
Original mode

Figure 13

Step 12

Check that all burner valves are off

You will need: one burner control knob.

Valves are shipped in the OFF position, but you should
check to be sure. Put the knob on each valve. Check by
pushing down and turning clockwise. If they do not turn
they are off, proceed to the next step.Figure 13.

Step 13

Connect flexible hose to manifold

You will need: the 12 foot natural gas supply hose and a
3/4 inch wrench.

Thread fitting end of hose onto manifold. Figure 14 (a).
Tighten with wrench.

Figure 14

(a)