WatchGuard Technologies WatchGuard Firebox SOHO 6 User Manual
Page 117
User Guide
99
Configure the SOHO 6 WebBlocker
3
Select Enable WebBlocking.
4
Enter the full access password.
The full access password allows a user a to bypasses otherwise blocked
sites.
5
Enter the inactivity timeout in minutes.
For example, setting the inactivity timeout at 15 minutes ensures that
unattended Web browsers are disconnected after sitting idle for 15
minutes.
6
If you intend to use WebBlocker groups and users, select
Require Web users to authenticate.
7
Click Submit to register your changes.
Create WebBlocker Groups and Users
Follow these instructions to create WebBlocker Groups.
1
With your Web browser, go to the SOHO 6 Configuration
Settings page using the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
WebBlocker => Groups.