Westinghouse LTV-20v4 - Manual (Page 18)

Please select the connection method based on the
signal cable at your home.
You may not have the standard coaxial cable at
home (Please check A).
Some families may have an older 300-Ohm Twin
Lead Cable (Please check B).
2-3 Antenna Connections
A VHF Only Or VHF / UHF Or Cable
75-Ohm
Coaxial Cable
VHF / UHF
Rear of TV
B VHF Only Or UHF Only Or VHF / UHF
300-Ohm Twin
Lead Cable VHF / UHF
Rear of TV
Antenna Connector
Cable
Side of TV
TV In
Cable
Box
In Out
Some pay CATV systems use encoded or encrypted signals. You need a decoder to
watch all channels.
1 Please connect the coaxial cable joint of CATV to the IN hole of decoder.
2 Connect the OUT hole of decoder to the TV In socket of your TV set by the coaxial
cable.
NOTE:
Consult the Dealer or Service Center for
the type of splitter, RF switch or combiner
that might be required.
20" LCD TV User's Manual
13
NOTE:
To watch TV program, please see "Section 3.1 Turning on your LCD TV and
watching a TV program" on page 18.