Walker MDD - Manual (Page 34)

32
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker ® replacement parts. Effective Date 03-01-06
GHS 7.0 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES
Upper Baffle Screen Assembly (Removable)
1 7509-3 Channel Bottom 2
2 7505 Mustache Spring 2
3 7507 Screen Seal (27-1/2) 1
4 7856-1 Edge Molding (26") 1
5 7509-2 Channel Top 2
6 7512-2 Removable Screen (3/16 Hole) 1 **
(Includes Items # 7, F025 & F190)
7 7506 Knob (10-24) Threaded Insert 2
8 7509-4 C-Channel 1
Exhaust Deflector Assembly
9 7504-3 Hinge (27") 1
10 7504-1 Exhaust Deflector (Two Piece Set) 1
7504 Exhaust Deflector Kit *
11 7504-8 Deflector Mount Doubler 2
GHS 7.0 Bushel Catcher Assembly
12 5583 Handle 1
13 5588 Rubber Bumper (.75 x .50) 2
14 7522 Side Strap, Door (7.0) 2
15 7610 Catcher Dump Plate 1
16 7610-1 Dump Plate Slide 2
17 7513-2 7.0 Mounting Frame Doubler 1
18 5281-5 Clevis Pin (1/4 x 0.80) 2
19 7503 7.0 Mounting Frame 1
(Includes Item # 21)
20 5522-1 Hinge Backup Plate, LH 1
21 7503-9 Pivot Bushing (5/16 x 5/8) 2
22 7510-1 7.0 Bushel Catcher, Including Door 1
7502-1 7.0 Catcher, Without Powerfil ® *
(Includes Door & Deflector)
7502-2 7.0 Catcher (With Powerfil ® ) *
(Includes Door & Deflector)
23 7514-10 7.0 Door Frame 1
24 5155-12 5/16 Ball Stud 2
25 5147 Spring Clip 4
26 5155-2 Gas Spring Cover 2
27 5155 Gas Spring Assembly / Catcher Door 2
(Includes Items # 24, 25, 29 & F049)
28 5524-1 Flanged Hinge Bearing 2
29 5155-13 3/4 Ball Stud 2
30 5523-6 Gas Spring Plate 2
31 7532 Handle, Catcher Lift 2
7534 Catcher Handle Kit *
(Includes Items # 31, 32, F004 & F172)
32 7533 Backing Plate, Handle 2
33 5155-15 Box Support, Gas Spring 2
34 7557-10 7.0 Wire Harness Channel 1
35 5976 Grommet (3/8 x 11/16) 1
36 5976-2 Grommet (3/16 x 3/4) 1
37 5522-2 Hinge Backup Plate, RH 1
38 7508 Safety Latch 1
39 7584 Reinforcing Strap 2
40 7514-1 Backup Plate, Catcher Door 1
5598 Optional Dump Bag (Not Shown)
May be ordered as an option. Contact your Walker dealer. Not
used with Power Dump Option.
Fasteners
F002 10-24 Keps Nut 27
F004 1/4-20 Keps Nut 16
F009 5/16-18 Whiz Locknut 2
F020 5/16-18 ESNA Nut 2
F025 10-24 x 3/8 PPHMS 4
F026 10-24 x 1/2 PPHMS 8
F027 10-24 x 5/8 PPHMS 4
F035 5/16-18 x 1-1/4 Hex Bolt 1
F037 10-24 x 5/8 PTH Screw 2
F049 5/16 SAE Washer 4
F069 3/32 x 1/2 Cotter Pin 2
F079 A/A66D Aluminum Pop Rivet 18
F085 3/16 Rivet Backup Washer 15
F129 10-24 x 1/2 PTHMS 14
F137 3/8-16 x 1/2 x 2 SHL Bolt 2
F172 1/4-20x3/4 Carriage Bolt 4
F188 1/4-20 Self Locking Nut 18
F190 #10 Internal Star Lock Washer 2
F195 1/4-20 x 3/4 PPHMS SS 8
F196 1/4-20 x 1 PPHMS SS 3
F198 .625 x .250 x .040 Washer, SS 5
F228 # 6 x 1/2 PPHSM Set Screw 2
F230 1/4-20 x 1-1/4 PPHMS SS 1
F242 1/4-20 x 7/8 PPHMS SS 11
F252 10-24 x 3/4 PFHMS 1
F255 5/16-18 x 1-1/2 Hex Bolt 1
F329 .260 ID x 1.939 OD Washer 2
F330 3/16 D x 21/32 Rivet, SS 2
F340 Rivet, Aluminum 4
F351 Aluminum Pop Rivet 6
* Service Part Only
** This screen can be replaced by P/N 7512-3 Removable
Screen (3/4" hole) for improved air flow performance in wet
conditions.