Windsor Walk Behind Scrubber 10052330 - Manual (Page 19)

MAINTENANCE
CUTTER 24V (SCE) 86037020 04/04/07 4-1
SERVICE SCHEDULE
MAINTENANCE DAILY WEEKLY MONTHLY ANNUALLY
Check battery acid level *
Check vac hose connections *
Clean the squeegee blades *
Inspect brushes or pads for debris:
wire string, wear *
Inspect vac fan shut off float screen *
Drain & rinse tanks *
Raise squeegee assembly *
Raise scrub deck assembly *
Charge the batteries. *
Remove the pad drivers/brushes *
Check the brushes/pads for damage
and/or wear *
Clean squeegee blades. *
Clean recovery tank shut off & screen *
Check battery cells w/ hydrometer *
Check solution strainer *
Check pivot points, caster and
squeegee for proper lubrication *
Inspect tank and hoses *
Clean tops of batteries and tray *
Check battery cable clamps *
Use a vacuum to remove lint from the
motor windings *
Grease casters *
Grease axle bearings *
Inspect all motors for carbon motor
brush wear *
Before
starting
the work
period
End of
work
period
before
storing