weber 55008 - Manual (Page 15)

B-3
(1)
(2)
Insert casters
You will need: frame assembly and two casters.
Push the casters firmly into the inserts in the ends of
the caster frame. Add Wrap-around Frame Panel
You will need: wrap around frame panel and a wrench.
Place wrap-around frame panel in place:
1) The cut-out tabs should fit between the washer
and the frame, as shown.
2) The square cut-out holes fit around the white plugs
in the frame as shown
Tighten Bolts with wrench.
Turn the frame over and continue with assembly.