Wells-Gardner D9300 Series User Manual
Page 8
Wells-Gardner Electronics Corporation
6
5. SET
UP:
Setting up your monitor is easy. All you have to do is make a few simple connections and
adjustments. The procedure is as follows:
5.1 Start
Up.
Your monitor starts up automatically when you insert the power plug to power source.
5-2.
Single Cable Connection.
Connect the 15pin signal cable to the source and lock both screws to ensure that the
monitor is properly grounded.
D type 15pin connector:
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VIDEO RED
9
N.C.
2
VIDEO GREEN
10
GROUND
3
VIDEO BLUE
11
N.C.
4
N.C.
12
SDA
5
N.C.
13
HOR-SYNC
6
VIDEO RED GROUND
14
VER-SYNC
7
VIDEO GREEN GROUND
15
SCL
8
VIDEO BLUE GROUND