White Rodgers 1F92-71 - Manual (Page 25)

25
5. Press SET
DAY once. The display will show the
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either TIME
FWD or TIME
BACK
until you
reach the current day of the week.
7. Press RUN
PRGM
once. The display will show the
correct time and room temperature alter-
nately.
Enter Heating Program
During programming, if you don’t press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the
alternating time/temperature display. To re-
sume programming after this happens, press
VIEW
PRGM
until you are at the point where you
stopped programming. Then you may con-
tinue to enter your programs normally. If you
want to stop programming at any time, simply
press RUN
PRGM
to resume program operation.
1. Press SYSTEM
SWITCH
until HEAT is displayed.
2. Press VIEW
PRGM
once. 5 DAY (indicating week-
day program), and MOR, representing
the morning heating period, will appear
in the display. Also displayed are the
currently programmed start time for the
MOR period and the currently pro-
grammed temperature.
EXAMPLE:
5 DAY