Electrolux ESF2410 - Manual (Page 13)

- 13 -
Installation instructions
Any electrical work required to install this
appliance, should be carried out by a qualified
electrician or competent person. Any plumbing work required to install this
appliance, should be carried out by a qualified
plumber or competent person.
Technical specifications
Capacity: 5 place settings accordance EN 50242
Dimensions: Height 460 mm
Width 450 mm
Depth 480 mm
Weight: Net 17 kg
Water pressures: Minimum 50 kPa (0,5 bar)
Maximum 1000 kPa (10 bar)
Water temperature: Maximum 65° C
Electrical data: Power supply 230 V - 50 Hz
Fuse 10 A
Heating element 1200 W
Power rating 1280 W
The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual.
Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using deter-
gent and a clean load.
Test standard: EN 50242 and EN 60704
Rated capacity: 5 place settings accordance EN 50242
Loading of basket: see chapter ”Loading the dishwasher”
Test program: energy saving 55° C
Detergent (IEC type B): 12 gram in the dispenser
Rinse aid (type III): setting medium
Feed water pressure: minimum 0,8 bar, maximum 10 bar
Waste water outlet: install according to figure below
Information for test centres