Westinghouse SK-26H570D - Manual (Page 26)

24
English
4. SELECTING THE INPUT SOURCE
There are two ways to select the video input source.
► NOTE:
If you enable the Autosource function, the TV will automatically detect and switch to a new input
connection (e.g. The TV will automatically switch to PC mode when you connect to a computer.).
Go to page 43 for instructions on how to enable this function.
BASIC OPERATION
Press any of the following remote control keys to change the input source:
TV, DVD, PC, YPbPr, Video, or HDMI.
Using the Individual Input Keys
Using the Input Key
(1) Press Input.
(2) Press ▲/▼ to select the preferred source.
(3) Press
to switch to the selected input source.
5. ADJUSTING THE DISPLAY FORMAT
The input source can sometimes affect the way images are displayed on-screen. You can adjust the display
format to view the image properly.
(1) Press .
(2) Press ▲/▼ to select the preferred display format. Options include:
・ Standard – Picture is displayed in its original size.
・ Fill – Picture is displayed to cover the entire screen.
・ Overscan – Picture is caled down to fit the display area.
(3) Press to apply the new display format.