Wilton 1230 - Manual (Page 4)

4
Column diameter 11 13/16 in. (295mm)
Column to spindle center distance, max. 46 in. (1150mm)
Column to spindle center distance, min. 13 3/8 in. (334mm)
Spindle travel along arm, total 35 in. (875mm)
Base surface to spindle end, max. (no tooling) 54 in. (1350.0mm)
Base surface to spindle end, min. (no tooling) 19 3/8 in. (484mm)
Quill (spindle) travel 9 7/8 in. (247mm)
Arm movement range on support column 34 5/8 in. (866mm)
Box table dimensions 27 7/8 x 20 1/2 x 16 1/2 in.
(697x513x413mm)
Base dimension 67 3/4 x 25 15/16 x 6 1/2 in.
(1694x648x163mm)
Spindle taper Morse #4
Spindle speeds, RPM 45-1550
Feed rates (distance/revolution) 0.002, 0.004, 0.006 in/rev
(0.005, 0.010, 0.030 mm/rev)
Main motor HP 5
Arm raising motor HP 1
Clamping motor 1
Coolant pump motor HP 1/8
Machine height (floor to max.) 109 1/2 in. (2,738mm)
Net weight (approx) 4,620 lb. (2,100 kg)
General specifications
The Wilton Model 1230 is a powerful and
versatile radial arm drill press. The drill head is
mounted on an arm and can move along the arm to
position the spindle over the work piece. The arm,
itself, can be rotated on its support column to allow
centering the spindle over the work piece.
Drilling can be performed manually or with
power assistance. In addition, parameters of RPM,
power feed rate and drilling depth can be pre-set by
the operator, using controls conveniently positioned
on the drill head, to allow any hole to be drilled using
power feed.
A precision machined box table is delivered with
the Model 1230 to allow convenient positioning and
clamping of smaller work pieces. The box table may
be removed from the base to allow larger workpieces
to be positioned and clamped on the precision
machined base, itself.
Drilling Tapping Boring
Steel 2 1/8 in. (53mm) 1 1/8 in. (28mm) 3 3/8 in. (84mm)
Cast iron 2 1/2 in. (63mm) 1 3/4 in. (44mm) 4 3/4 in. (119mm)
Machining capacities
Overall dimensions and specifications