Wells WM-TR - Manual (Page 17)

8. WATER LEVEL PROBE is located in the tank, in the back right cor-
ner near the top.
Using a STANDARD GREEN SCRUB PAD, clean all scale and
lime from the water level probe.
Using the scrub pad, clean all scale and lime deposits from the lip
of the tank opening and from the inside of the tank.
9. Rinse tank thoroughly at least twice.
Pour all rinse water into a sink or appropriate container for
disposal.
10. Reinstall tank cover on tank.
Reinstall tank on Water-Max™. Make sure tank connector is
fully seated on shelf.
Press power switch to ON.
After a short delay, tank will begin filling.
Procedure is complete
DELIMING INSTRUCTIONS (continued)
INSIDE TANK,
AROUND LIP,
PROBE
SCRUB TANK
RINSE
TWICE
ON
OFF
REINSTALL
LID & TANK
15