weber SUMMIT 41996 - Manual (Page 48)

E-2
Maintenance
Replacing Main Burners
1. Your Summit ® gas grill must be OFF and cool.
2. Turn gas OFF at source.
3. Disconnect regulator.
4. Remove cooking grates.
5. Remove Smoker box.
6. Remove Flavorizer ® bars.
7. To remove control panel refer to “Remove the control
panel” under “Check for Gas Leaks.”
8. Disconnect all ignition wires from the Ignition Module.
9. Disconnect the Thermocouple from the IR Burner
valve.
10. Remove screws from the manifold assembly:
(a) Locate the screws on both sides of the manifold frame.
(b) Remove the screws from manifold frame.
a = Blue Tab with Black Wire
b = Yellow Tab with Black Wire
c = White Tab with Black Wire
d = Solid White Wire
e = Green Tab with Black Wire
f = Solid Red Wire
- +
b
- +
a
c
d
e
f
(a)
(a)
(b) (b)