weber Summit E/S 470 LP - Manual (Page 34)

34
mAINTENANcE
replaCinG main burners
A) Your Summit ® gas grill must be off and cool .
B) Turn gas off at source .
C) Disconnect gas supply .
D) Remove cooking grates .
E) Remove Flavorizer
® bars .
F) Remove smoker box (if included in your model) .
remove Control panel
G) Parts required: Phillips screwdriver and a towel .
a) Remove the burner control knobs (1) .
b) Open both doors and place a towel on top of the doors .
this will protect the control panel and tops of the doors from getting
scratched on the next step.
c) Remove the screws from the underside of the control panel with a Phillips
screwdriver (2) .
d) Tilt the conrol panel forward and lift up and away from the grill (3) (For Summit ®
models with LED features: Be careful not to break or disconnect the wires for
the control panel LED’s) .
e) Place the control panel on the towel covering the door assemblies (4) .
H) Remove the two screws that secure the manifold to the cookbox . Pull manifold
assembly out from the manifold frame (5) .
I) Pull the selected burner(s) tube(s) from manifold frame and replace with a new
burner tube (6) .
1
the grill illustrated
may have slight
differences than the
model purchased.
6
7
5
6
2
3
4