Weider 831.150360 - Manual (Page 7)

7
7. Press two 38mm x 50mm Inner Caps (16) into the
Leg Lever (23). Press a 1” Round Inner Cap (14)
into the Leg Lever. Press a 1” Angled Round Cap
(11) onto the Leg Lever.
Lubricate an M10 x 75mm Bolt (5). Attach the Leg
Lever (23) to the Front Leg (20) with the M10 x
75mm Bolt and an M10 Nylon Locknut (4).
Do not
overtighten the Nylon Locknut.
Slide the Weight Stop (28) onto the Leg Lever (23).
8. Attach both Backrest Brackets (12) to the Backrest
(15) with four M6 x 16mm Screws (6).
The
Backrests must be oriented as shown.
9. Lubricate an M8 x 75mm Bolt (29). Attach the
Backrest Brackets (12) to the Bench Frame (19)
with the M8 x 75mm Bolt and an M8 Nylon Locknut
(7).
Do not overtighten the Nylon Locknut.
Rest the Backrest Brackets (12) on the Adjusment
Tube (13).
7
8
9
4
23
16
11
5
Lubricate
20
14 28
16
12
15
6
6
12
13
19
7
29
Lubricate