Part identification chart – Weider 831.150360 User Manual

Page 4

Text mode
Original mode

PART IDENTIFICATION CHART

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. The second number refers to the quantity needed for assembly.
Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in
the parts bags, check to see if it has been pre-assembled.

M8 Nylon Locknut (7)–11

M8 Washer (2)–4

M10 Nylon Locknut (4)–3

3/4" Round Inner Cap (25)–6

1" Angled Round Cap (11)–1

M8 x 48mm Carriage Bolt (3)–4

M6 x 16mm Screw (6)–6

1" Round Inner Cap (14)–3

M8 x 68mm Bolt (8)–4

M10 x 75mm Bolt (5)–3

M4 x 25mm Screw (10)–1

M8 x 75mm Bolt (29)–1