White Rodgers 1F95-80 - Manual (Page 30)

30
4. Press ADV
DAY to select the day you want to
copy the program TO.
5. Press HOLD
COPY
. COPY will disappear from the
display, and the display will show the cop-
ied heating/cooling time and temperature
for the day you copied TO.
6. Repeat the above steps to copy any day’s
programming into any other day’s pro-
gram.
7. Press RUN
PRGM
to begin program operation.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat
programming one final time before beginning
thermostat operation.
1. Press SYSTEM
SWITCH
until HEAT is displayed.
2. Press and hold VIEW
PRGM
to view the heating
times and temperatures for Monday.
3. Press ADV
DAY once to advance to Tuesday.
4. Press and hold VIEW
PRGM
to view heating times
and temperatures for Tuesday.
5. Repeat steps 3 and 4 to review all remain-
ing days’ programming. If you find an error
in any day’s programming, go back to the
programming instructions to correct the
error (you can change any part of your
program while you are reviewing it).
6. Press RUN
PRGM
.
7. Press SYSTEM
SWITCH
until COOL is displayed.