White Rodgers 1F95-80 User Manual
Page 23
23
5.
Press
SET
CLOCK
once. The display will show
the day of the week as an abbreviation (MO
for Monday, TU for Tuesday, etc.).
6.
Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the correct day of the week.
7.
Press
RUN
PRGM
once. The display will show the
correct time and room temperature alter-
nately.
Program Heating and Cooling
Temperatures
During programming, if you don’t press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume
programming after this happens, press
VIEW
PRGM
until you are at the point where you stopped
programming. Then you may continue to enter
your programs normally. If you want to stop
programming at any time, simply press
RUN
PRGM
to
resume program operation.
1.
Press
SYSTEM
SWITCH
until HEAT is displayed.
2.
Press
VIEW
TEMP
once. The display will continue
to show HEAT. Beside HEAT is the letter
O, representing the occupied heating tem-
perature (HEAT O). At the right of the
display is the currently programmed HEAT
O setting.
3.
Press either
or
to change the
temperature to your selected HEAT O set-
ting.