Whirlpool Gas Dryers - Manual (Page 15)

15
R
EMOVING ACCUMULATED LINT FROM INSIDE THE DRYER CABINET
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every 2 to 3 years,
or more often, depending on dryer usage. Cleaning
should be done by a qualified person. If you have
any questions or comments, please call our
Consumer Assistance Center at 1-800-253-1301
from anywhere in the U.S.A.
w WARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Put on heavy gloves to protect hands from cuts.
3. Remove rear panel.
4. Remove any lint using a vacuum cleaner or soft
brush. Avoid damaging wires and thermostats.
5. Replace rear panel.
6. Open lint screen lid. Remove 2 screws from
lint screen area.
7. Open top by pulling forward and up at each
front corner (see illustration). Rest raised top
against wall behind dryer (top is hinged at rear).
Dryer with rear panel removed
(electric models only)
Thermostats
Heater box
CARING FOR YOUR DRYER