Walker SB36 - Manual (Page 3)

Table of Contents
Owner’s Manual
General Information
________________ 1
HIGHLIGHTED INFORMATION _____________ 1
GLOSSARY ____________________________ 1
IDENTIFYING NUMBER LOCATIONS ________ 1
SERVICING OF DRIVETRAIN GEARBOX ____ 2
UNIT DESCRIPTION _____________________ 2
Specifications
_______________________ 3
GROUND CLEARANCE IN RAISED POSITION_ 3
DIMENSIONS ___________________________ 3
BLOWER SPOUT ________________________ 3
AUGER DIMENSIONS ____________________ 3
WEIGHT _______________________________ 3
DRIVE SYSTEM _________________________ 3
SCRAPER______________________________ 3
TRACTOR COUNTERWEIGHT _____________ 3
Component Identification ___________ 4
Safety Instructions
__________________ 6
BEFORE OPERATING ____________________ 6
OPERATING ____________________________ 7
MAINTENANCE _________________________ 8
SAFETY, CONTROL,
AND INSTRUCTION DECALS ______________ 9
Assembly Instructions _____________ 10
SETUP AND INSTALLATION______________ 10
PREOPERATING CHECKLIST ____________ 14
Operating Instructions _____________ 15
CONTROL IDENTIFICATION, LOCATION,
AND FUNCTION ________________________ 15
Tractor Controls ______________________ 15
Lift Handle___________________________ 15
Foot Trigger _________________________ 16
Spout Position Control Handle __________ 16
Deflector Position Control Handle _______ 16
STARTING THE MACHINE _______________ 16
ENGAGING THE SNOWBLOWER _________ 16
STOPPING THE MACHINE _______________ 17
RECOMMENDATIONS FOR SNOWBLOWING_ 18
REMOVING SNOW______________________ 18
Throw Snow to One Side_______________ 18
Throw Snow to Both Sides _____________ 19
CLOGGING CHECKLIST _________________ 19
Operator’s Notes
___________________ 20
Maintenance Instructions
__________ 21
MAINTENANCE SCHEDULE CHART _______ 21
LUBRICATION _________________________ 22
Grease Fitting and Oil Point Lubrication__ 22
PTO U-Joint _________________________ 22
Gearbox Lubrication __________________ 22
Drive Chain Lubrication _______________ 23
REPLACING/REPAIRING ________________ 26
Gearbox Replacement_________________ 26
Drive Chain__________________________ 27
Sprockets ___________________________ 28
Drive Shaft Sprocket Replacement ______ 28
Auger Sprocket Replacement __________ 29
Scraper Blade _______________________ 31
Flexible Coupling Spider ______________ 31
U-Joint Shear Pin_____________________ 31
ADJUSTMENTS ________________________ 31
Drive Chain Tension __________________ 31
Gauge Wheels or Skid Shoes ___________ 32
Removal and Storage Instructions _ 33
REMOVAL ____________________________ 33
END OF SEASON STORAGE _____________ 33
Illustrated Parts Manual
MAIN BODY COMPONENTS______________ 34
AUGER AND DRIVETRAIN COMPONENTS _ 36
KEY TO ABBREVIATIONS
USED IN ILLUSTRATED PARTS LIST ______ 38
Warranty ___________________________ 39