Drive chain lubrication, Remove chain guard cover, Maintenance instructions – Walker SB36 User Manual

Page 26

Text mode
Original mode

Maintenance Instructions

LUBRICATION

Drive Chain Lubrication

Lubricate the drive chain every 25 hours. A light
penetrating oil or special purpose chain oil is recom-
mended. Lubricate the drive chain as follows:

Remove the three (3) screws fastening the re-
movable chain guard cover to the snowblower
housing and remove the cover.

Remove Chain Guard Cover

Apply oil to the drive chain.

Adjust the chain if necessary. Refer to AD-
JUSTMENTS of Drive Chain in this section.

Reinstall chain guard cover by reversing the re-
moval procedures.

Chain Tension Block

Mounting Bolt

Chain Guard Cover

Chain