White Rodgers 1F97-71 - Manual (Page 29)

29
Program Cooling Temperatures
If outside temperature is below 50
°
F, we
recommend that you remove the thermo-
stat from the wall before proceeding with
the following steps to program cooling
temperatures. Personal injury and/or prop-
erty damage could result from air condi-
tioner compressor slugging. Fresh "AA"
alkaline batteries (such as Energizer
®
brand) must be installed to perform off-
wall programming. Programming away
from the wall should prevent accidental
compressor operation. BE SURE TO
PRESS SYSTEM
SWITCH
UNTIL OFF IS DISPLAYED
BEFORE REATTACHING THE THERMO-
STAT TO THE SUBBASE!
1. To program cooling temperatures for the heat-
ing/cooling periods you have already set, press
SYSTEM
SWITCH
until COOL is displayed.
2. Press VIEW
PRGM
once. The Monday heating/cool-
ing period 1 start time you programmed earlier
will be displayed, along with the currently
programmed COOL A, B, C, or D tempera-
ture.
3. Press or to display the COOL A,
B, C, or D temperature you want for Monday's
heating/cooling period 1. If you want the fan to
run continuously during this period, press
FAN
SWITCH
until PRG FAN is displayed.
4. Press VIEW
PRGM
, then press or to
select Monday's COOL A, B, C, or D tempera-
ture for period 2. If you want the fan to run
CAUTION !