Westcott 4835 - Manual (Page 2)

Light Modifiers
Page 2 of 2
Questions? Please call 800.886.1689 or email [email protected]
To dismount the speed ring, first remove the diffuser panel. Put the Westcott Box onto a table or the floor.
Position the Box so that a rod is easily accessible to your hand. While exerting a slight pressure onto the speed
ring with your other hand, pull steadily on the rod. The object of putting pressure onto the speed ring is to line up
the angle between the rod and the speed ring port. (The angles created by the tension on the metal rod push
against the speed ring ports. This is what causes the Box to stay mounted onto the ring.) After one rod is pulled
out, release the pressure on the speed ring. Pulling steadily on the opposite rod to dismount it followed by the
remaining 2 rods.
Optional 40
°Degree Fabric Grids
Optional 40-Degree Fabric Grids are available for Box 1,
Box 2 and Box 3. The Fabric Grids are extremely portable because they are completely collapsible and fit easily
into any bag. The lightweight Grid conveniently and quickly fastens around the inside of the box front with the
hook and loop tape. For optimum formatting capability, the Fabric Grid allows directional control of light to put
light where you want it and keep it from where you don’t.
. ©F.J. Westcott Company