Weider WESY5863.0 - Manual (Page 7)

7
8. Attach the Leg Lever Bumper (55) to the Front
Leg (6) with an M4 x 19mm Screw (77).
Press two 45mm Square Inner Caps (42) into the
Leg Lever (7).
Lubricate an M10 x 68mm Bolt (56) with grease.
Orient the Leg Lever (7) with the slot on the side
shown. Attach the Leg Lever to the Front Leg (6)
with the Bolt and an M10 Nylon Locknut (76).
Do
not overtighten the Locknut; the Leg Lever
must be able to pivot easily.
8
56
76
6
7
42
77
55
42
Lubricate
Slot
6. Attach the Lat Tower (4) to the Upright (3) with
four M10 x 25mm Button Head Screws (87), and
four M10 Lock Washers (103).
Attach the Name Plate (89) to the Lat Tower (4)
with two M4 x 16mm Screws (62).
6
4
3
89
62
62
87
87
103
103
7. Press a 38mm Round Inner Cap (38) into each
end of the Top Frame (10).
Attach two Eyebolts (34) to the Top Frame (10)
with two M8 Washers (59) and two M8 Nylon
Locknuts (65).
Do not overtighten the Locknuts;
the Eyebolts must be able to rotate freely.
Attach the Top Frame (10) to the Lat Tower (4)
with two M10 x 65mm Button Head Screws (70),
two M10 Washers (75), and the Top Frame (93).
Make sure that the Eyebolts (34) are oriented
as shown in the inset drawing. If they are not,
turn the Top Frame around and reattach it.
7
38
65
65
10
34
59
34
70
59
93
75
4
38
34
10
4
Side View