Wintal STB1HD - Manual (Page 4)

I. General Information
1. Preface
This High definition television set-top receiver is designed to pick up free-to-air
digital broadcasts. It is fully compliant with the MPEG-2 and DVB-T standards. This
unit can receive digital terrestrial TV signals transmitted at the rate of
3.7~23.8Mb/S on specific frequencies within the VHF or UHF band. The unit also
provides a high quality digital video and audio connection, HDMI.
2. Main Features
— Fully DVB-T & MPEG-2 compliant
— Digital Reception covers VHF & UHF band
— Multi Bandwidth selection: 6M & 7M & 8M
— Multi demodulation selection: QPSK,QAM16, QAM64
— MPEG-2 HD/SD decoding (MP@HL/ML)
— Dolby AC-3 or MPEG-1 audio decoding
— Down-mixes 5.1 AC3 to two channels encoded with Dolby Prologic Surround
— YPbPr Output: supporting 1080i (high quality video output)
— VGA output: supporting 1080i (high quality video output)
— HMDI output: supporting 1080i (highest quality output- recommended where
available)
— CVBS output: PAL (low quality video output –not recommended)
— Conversion between SD programs and HD programs
— Teletext (OSD output)
— Subtitle (OSD output)
— Aspect ratio: 4:3/16:9
— Dolby 5.1 channel or PCM digital audio output (Bitstream)
— Electronic program guide (EPG)
— Software upgrade via RS232
— 32 bits true color on screen display (OSD)
— Channel and Program editor
3