White Rodgers 1F95EZ-0671 - Manual (Page 15)

4
Press the Time button to toggle between Time and
Temperature. Press the or buttons to adjust
the start time for the period. The time will change in
15 minute increments.
5
After you have set the time and the temperature for
the period to begin, press Sched to advance to the
next program period.
6
Repeat steps 3 through 5 until all of the program
times and temperatures are set for all program
periods for that day.
7
Use the Copy button to copy current day’s program
to any other day as described above. Or press Adv
Day and repeat steps 3 through 6 until programs for
all days are entered.
8
When programming is complete and all of the times
and temperatures match your desired heating
schedule, press Run. The thermostat will now run
your heating program.
ENTER A/C PROGRAM
Press A/C to place thermostat in air conditioning mode. Set
the A/C program following the “Enter Heating Program”
steps.
ENTER HEATING PROGRAM
1
In Heat mode, press the Menu button to display
additional button choices.
2
Press Sched button. The display will show the
day being programmed and the time and desired
temperature for the period. Either “Day” for two
period confi guration or “Morn” for four period
confi guration will be displayed to indicate the
period. “Heat” is displayed indicating the mode
being programmed.
3
Press the or button to change the
temperature to your selected temperature for the
1st heating period (Day or Morn).
PROGRAMMING YOUR THERMOSTAT
Blue Easy Reader Thermostat Homeowner’s Guide • 15
3
4 7 8
7
5 2