Wilson Car Amplifier - Manual (Page 3)

2
Installation Instructions for the Following Wilson Amplifi er:
SIGNALBOOST™ Dual-Band Cellular/PCS Amplifi er
Model/Part #811210 / Part #811211
FCC ID: PWO819DA
IC: 4726A-819DA
Patent Pending
The term “IC” before the radio certifi cation number only signifi es that
Industry Canada technical specifi cations were met.
Inside this Package
How it Works
Your new Wilson SIGNALBOOST™ Amplifi er has been carefully engineered to signifi cantly
improve the performance of your cell phone or cellular data card in both vehicle and home/
offi ce applications. Together with an antenna, the amplifi er’s state-of-the-art technology is
designed to increase your signal up to 10-15 times, reduce disconnects and dropouts, and
increase data communication rates needed for 3G technologies. The universal connector
fi ts all cellular and PCS phones and data cards. (Not designed for iDEN/NEXTEL)
The antenna will collect the cell tower signal and send it through the cable to the amplifi er.
The signal is then boosted and sent through the extension cable to the universal connector
on your cell phone or data card, which then communicates with the improved signal. When
the cell phone or data card transmits, the signal goes through the universal connector
and the extension cable, is boosted by the amplifi er and broadcast back to the cell tower
through the antenna.
NOTE: Use of this amplifi er with an antenna gain higher than 6.12 dBi is in violation of FCC
regulations for which the offender is fully liable. All Wilson mobile antennas are 6.12 dBi or
less.
SIGNALBOOST™
amplifi er
12 V DC power
supply (vehicle)
Universal
connector
12-inch Magnet-Mount
Antenna
(Part #301103)
Soft Carrying
Case
(Part #859924)
Window Bracket and
AC/DC Power Supply
(home/offi ce)
(Part #859940)
Optional Items
Mini Magnet-
Mount Antenna
(811211 only)
VELCRO ® Cable Wrench
Mini Magnet-Mount
Antenna
(Part #301113)