beautypg.com

Sealed surface burners and cooktop, Cleaning the surface burners – Whirlpool GL8856EB User Manual

Page 11

background image

11

Sealed surface burners and cooktop

Cast-iron
burner cap

Cleaning the surface burners

You should routinely remove and clean the burner
caps. Always clean the burner caps after a
spillover. Keeping the burner caps clean prevents
improper ignition and an uneven flame.

For the proper flow of gas and ignition of the
burner, DO NOT ALLOW SPILLS, FOOD, CLEAN-
ING AGENTS, OR ANY OTHER MATERIAL TO
ENTER THE GAS TUBE OPENING.

Gas must flow freely through the gas tube
opening for the burner to light properly. You must
keep this area free of any soil and protect it from
boilovers or spillovers. ALWAYS keep the burner
cap in place whenever a surface burner is in use.

Let the cooktop cool before cleaning.

Do not use oven cleaners, bleach, or rust
removers.

Do not obstruct the flow of combustion and
ventilation air.

If the knobs are removed while cleaning, be careful
not to spill liquids through the holes in the control
area.

Be careful not to allow moisture to collect in the
control area. Moisture can cause the ignitor
switches to fail.

Alignment pins

Occasionally check the burner flames for proper

size and shape as
shown. A good flame
is blue in color. If the
flames are uneven, you
may need to clean the
burners.

Gas tube
opening

Burner

base

Ignitor

C a r i n g f o r Y o u r C o o k t o p