West Bend COFFEE CENTER - Manual (Page 5)

Steam
Release Valve
Steam Plug Boiler Cap
Filter Basket
Filter Holder
Coffee Filter
Holder
2-Cup Adaptor Steam Wand
Carafe Cover
Espresso cover
Coffee Carafe
Espresso
carafe
Measuring
Spoon
Espresso
Maker Power
Switch
Overflow Grid
Base
Coffee Maker
Power Switch
5
U
SING
Y
OUR
3
IN
1 C
OFFEE
C
ENTER
–
F
IRST
U
SE
1. Place appliance on dry, level, heat-resistant
surface, away from any edge.
2. With both switches in the “OFF” position, plug cord
into a 120 volt AC electric outlet only.
3. We recommend that you get familiar with all the
parts of your coffee machine before using it for the
first time. Read all instructions, cautions and notes
before actually using the appliance.
4. Wash all loose parts in warm soapy water, rinse
thoroughly and dry.
5. To remove any residuals of production that may
reside in the appliance, we recommend making 4
cups of espresso and at least one full pot of coffee
with water only, no coffee grounds. During the brewing cycle, open the steam
valve for 5-10 seconds to clean the steam wand.
Steam
Wand
Steam
Nozzle
Frothing
Nozzle
• Small amounts of smoke and/or odor may occur upon heating due to the release
of manufacturing oils – this is normal.
• Some minor expansion/contraction sounds may occur during heating and
cooling – this is normal.