Gaming headset – Asus Xonar Xense User Manual
Page 14
6
ASUS Xonar Xense
5
Front panel audio header
Connect one end of the front panel audio cable to the front panel audio header on
the audio card, with the other end to the chassis-mounted front panel audio I/O
module.
6
Aux Input Header
This 4-pin header usually connects to the Analog Audio output of TV tuner card or
other sound source inside your computer. To monitor your TV tuner card’s audio
from this Aux-In, you must enable the “monitor” function for Aux-In in the Xonar
Xense Audio Center‘s recording mixer.
7
S/PDIF Header
Connects to supported graphics card.
8
Power connector
Connects to the power cable of your power supply unit.
9
PCI Bus golden fingers
Connects to the PCI Express slot on your motherboard.
Gaming headset
1
Microphone boom arm
Allows you to move your headset’s microphone comfortably close to your mouth.
2
Volume control and mute box
Allows you to increase/decrease the volume of your headset’s audio output and to
put it on mute mode.
3
6.3mm connectors
Connects your headset to the audio card’s Mic In/Line-In and Headphone Out ports.
1
2
3