Wasp Bar Code CCD Scanner - Manual (Page 9)

Chapter 5
7
FACTORY DEFAULT & KEYBOARD CONNECTION
6
Use the Factory Default barcode to reset the scanner to the Default settings.
PC (USB or PS/2) * N o t e b o o k
The Keyboard Connection is used to program the Wasp WCS3900 Series
scanner for the type of host computer.
*Default
Keyboard Connection
Factory Default
Continuous Scan Mode Enable
Scan this continuous scan mode barcode to enable continuous scanning.
This feature allows the scanner to be used with a stand for hands free
scanning. The trigger is functionless in this mode. To turn this mode off
scan the default barcode above.
Continuous Mode
F a c t o ry Default
WCS3900_3905Manual0707_sm.A0 6/25/08 4:32 PM Page 7