Whirlpool WHELJ1 - Manual (Page 14)

14
Programming the Central Water Filtration System
If you have questions about installation, program-
ming, operating and routine maintenance...
call 1-866-986-3223, Monday - Friday, 8 am to 9 pm,
EST.
When the transformer is plugged into the electrical outlet,
a model code and a test number (example: J1.3), begin
to flash in the faceplate display. Then, 12:00 PM and the
words “PRESENT TIME" begin to flash.
NOTE: If “- - - -” shows in the display, press the UP or
DOWN button until “CF 8” shows in the dis-
play. Then, press the PROGRAM button to set,
and change to the flashing “PRESENT TIME" dis-
play.
SET TIME OF DAY
If the words “PRESENT TIME" do not show in the display,
press the PROGRAM button until they do.
1. Press the UP or DOWN buttons to set the pres-
ent time. Up moves the display ahead; down sets the
time back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly
advance the display. Hold the buttons down for
fast advance.
2. Press the PROGRAM button a few times, until the time
appears on the display, but is not flashing.
FIG. 12
FIG. 13
FIG. 14
UP
button
DOWN
button
Display
CLEAN
button
PROGRAM
button