beautypg.com

Low water indicator k, Coffee­making tips, Cleaning – Bosch TKA8011 User Manual

Page 8: Before using for the first time, Brewing coffee

background image

de

Robert Bosch Hausgeräte GmbH

6

en

Low water indicator K

This coffee machine senses if the water

volume in the water tank is low (less than

approx. 4 cups).

If the water level is low, K lights up and

the machine automatically increases the

brewing time. This ensures that the coffee

retains its ideal flavour.

Coffee­making tips

Store ground coffee in a cool place; you

can also freeze it.

Once a package of coffee has been

opened, close it tightly to maintain its

aroma.

How the coffee beans are roasted affects

their taste and aroma.

Darker roast = more flavour

Lighter roast = more acidity

Cleaning

Never immerse the device in water or place

it in the dishwasher!

Don’t steam-clean the appliance.

Unplug the appliance before cleaning it.

– Clean all parts that came into contact

with coffee after each use.

– Clean the coffee machine’s exterior

with a damp cloth; do not use strong or

abrasive cleaning agents.

– Clean the water tank

1 under running

water; don’t use a firm brush.

– The glass carafe

6 and its lid are

dishwasher-safe.

Before using

for the first time

● Remove any stickers or film.

● Pull enough of the power cable out of the

storage compartment

12 and plug in.

● To clean, fill water tank with

6 cups of

water and replace it. Press the ON/OFF

switch

7 O; cleaning program starts.

● Repeat the cleaning process.

Note: You may notice a „new machine“

smell; this is normal. If this is the case, fill

with a vinegar solution (1 cup of vinegar

for 5 cups of water) and run the cleaning

program. Next, rinse the machine twice with

6 cups of water.

● Clean the carafe thoroughly.

Brewing coffee

● Remove the water tank

1, fill it with water

and replace it.

● Flip out the filter housing

3 and let it

engage.

● Insert a 1x4 paper filter in the filter holder

4 and add the desired amount of coffee.

● Flip back the filter housing

3 until it

engages.

● Place the glass carafe

6 with the lid

closed under the filter housing

3.

● Press the ON/OFF switch

7 O to start the

brewing cycle. At the same time, the

auto

off function is activated; the display lights

up.

Note: The machine has an auto off (power

save) function, which switches it off after

approximately two hours.

Important: When the brewing process

is complete, wait a moment until all the

coffee has run through the filter and into

the carafe.

Let the machine cool down for five

minutes before brewing a fresh pot.

This manual is related to the following products: