Wasp Bar Code WLR8900 Series - Manual (Page 7)

Chapter 4
5
Your Wasp WLR8900/8905 Scanners are ready for use. The default
settings of the scanners have been pre-programmed for the most common
bar code configurations. Use the “WLR8900/8905 Setup & Configuration”
sections only to customize the scanners settings. Please review the
“Enable Barcode Symbologies” configuration beginning on page 14 to see
the list of barcode symbologies which are enabled by default.
Tip:
• Use the pre-printed “Barcode Test Symbols” in Appendix A on pages
29-31 as a test chart to practice scanning.
Quick Start
USB Connection
PS2 Connection
into your PC’s USB port.
WLR8900_8905Manual0308_sm.A0 6/25/08 3:38 PM Page 5