weber 4000 - Manual (Page 24)

24
Step 24
Complete accessory installation
You will need: work table, two accessory trays, serving
tray, Warm-Up Basket, warming rack, thermometer, two
tubing plugs and a hammer.
Insert one end of the Weber Warm-Up Basket into the
hole in the right end of the lid and the other end into the
slot in the left end of the lid. Figure 38 (a).
Set the work table onto the left side rails. Figure 38 (b).
Place porcelain serving tray on the work table.
Figure 38 (c).
Set the accessory trays between the two frame
connectors. Figure 38 (d).
Set the warming rack into the slots at the rear of the
cooking box. Figure 38 (e).
Insert the thermometer into its holder. Figure 38 (f).
Insert tubing plugs into the ends of the frame. To fully seat
the plugs, you may have to tap them lightly with a
hammer. Figure 38 (g).
Figure 38
(a)
(e)
(f)
(g)
(b)
(d)
(c)
Step 23
Secure side burner
Pull the right hand swing table up. Stand to the right side
of the barbecue. Slightly pull back both side burner
locks. Slide the side burner toward the control panel.
The locks will snap into the slots in the front and back of
the side burner. Figure 37.
Figure 37
View from top
Side view
ƽCAUTION: To keep the barbecue stationary, the
tabs on the locking casters should be in the down
position.