Whynter SNO ARC-13W/S - Manual (Page 6)

6
WINDOW KIT INSTALLATION
In order for this portable air conditioner to work properly, the hot air from the back of the unit must be vented to the outside.
Please follow the instructions below for window kit installation.
1. Extend the exhaust hose (Part 1) at least 6” and insert it to the outdoor exhaust outlet at back of the unit.
2. Attach the round connector (Part 3) to the other end of the hose.
3. Open your window and place the adjustable window slide bar (Part 2) to the opening of the window. Expand the bar so it
fits tightly horizontally.
4. Lower the window so the bar fits to the opening of the window tightly.
5. Attach the hose with the round connector to the round opening of the window slide bar.
6. When the air conditioner is not in use, remove the hose from the window slide bar and place the round cover (Part 4) to
the opening of the bar.
7. For non-fixed openings, such as doors or sliding doors that may need to be opened or closed, attach the rectangle
connector (Part 5) to the end of the hose and place the connector to the opening of the door.