Whynter SNO ARC-13W/S - Manual (Page 15)

15
COOLING/ DEHUMIDIFICATION ONLY/ FAN ONLY FUNCTION (Button T4)
Cooling Mode
In this mode, the air conditioner cools and dehumidifies the room. To activate this function, press the T4 Function Mode Selector
button until the FROST symbol appears on the display (Fig. 10). When this function mode is set, the compressor will start in
approximately 3 minutes. Subsequently, set the desired temperature and fan speed (refer to the appropriate sections). Please note
that when switching function mode, there will be an approximately 3 minutes transition time.
Dehumidifying Only Mode
In this mode, the air conditioner only dehumidifies the room, the compressor will activate intermittently depending on the ambient
temperature. To activate this function, press the T4 Function Mode Selector button until the DROPLET symbol appears on the
display (Fig. 11). When this function mode is set, the fan speed settings cannot be changed and it is automatically set to minimum.
Please note that when switching function mode, there will be an approximately 3 minutes transition time.
Fig. 10 Fig. 11