Weslo WEBE13810 - Manual (Page 7)

3. Attach the Frame (2) to the Crossbar (3) with two
M8 x 57mm Bolts (18), two M8 Washers (16), and
two M8 Nylon Locknuts (17).
Note: Do not tighten
the Nylon Locknuts yet.
4. Tap a 30mm Square Inner Cap (22) into each end
of the Leg Lever (4).
Tap a 1” Round Inner Cap (24) into the indicated
end of the weight tube on the Leg Lever (4). Tap
the 1” Round Angled Cap (20) onto the other end
of the weight tube.
5. Lubricate the M10 x 60mm Bolt (32). Attach the
Leg Lever (4) to the bracket on the Front Leg (8)
with the Bolt and an M10 Nylon Locknut (33).
6. Tap two 3/4” Round Inner Caps (9) into each Long
Pad Tube (10). Insert the Pad Tubes through the
holes in the Leg Lever (4). Slide two Long Foam
Pads (23) onto each Pad Tube.
3
2
22
24
Weight Tube
9
10
10
9
4
23
23
33
4
4
20
22
3
18
16 17
18
6
5 Lubricate
32
4
7
8