Weslo WEBE13810 - Manual (Page 11)

11
ATTACHING THE LAT TOWER
For some exercises, the Lat Tower (40) needs to be
attached to the weight bench. To do this, remove the
38mm Square Inner Cap (21) from the Front Leg (8).
Insert the Lat Tower into the Front Leg and align the
indicated hole in the Lat Tower with the adjustment hole
in the Front Leg. Secure the Lat Tower with the
Adjustment Knob (31).
Note: When the Lat Tower (40) is not being used, it
should be stored away from the weight bench, and
the 38mm Square Inner Cap (21) should be inserted
into the Front Leg (8).
ATTACHING THE LAT BAR
Attach the Lat Bar (37) to the Cable (39) with a Cable
Clip (41). Rest the Lat Bar on the lat bar rest on the Lat
Tower (40).
40
Hole
Adjustment
Hole
21
8
31
37
39
41
Lat Bar
Rest
40
WARNING:
When you are
using the Lat Tower (40), place a barbell (not
included) with the same amount of weight
on the weight rests to balance the bench.