Wolf Appliance Company PI423418(R) - Manual (Page 6)

6
Dimensions in parentheses are in
millimeters unless otherwise specified.
Planning Information
Pro Island Ventilation Hood
M O D E L P I 4 2 3 4 1 8 ( R )
Ducting for Pro island
hoods.
ROOF CAP OR REMOTE BLOWER
18" (457)
HEIGHT OF HOOD
ISLAND HOOD
DUCTWORK INSTALLATION
THROUGH ROOF
34" (864)
DEPTH OF HOOD
10" ROUND DUCT
VERTICAL
DISCHARGE
VERTICAL DISCHARGE ONLY FOR ISLAND HOODS.
TRANSITION
14 1 / 8 "W x 9"D TO 10" ROUND
7"H (INCLUDING FLANGES)
SOFFIT, CABINET OR
DUCT COVER
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
D U C T I N G C O N S I D E R A T I O N S
Wolf Pro island hoods are shipped without the
blower assembly. Internal, in-line and remote
blower assemblies are available.
IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.
Pro island hoods have a vertical discharge
location with 10" (254) round duct. A transition
with backdraft damper is included. The hood will
operate most efficiently when ductwork does
not exceed 50' (15 m) in length.
Local building codes may require the use of
make-up air. Consult your local HVAC profes-
sional for specific requirements in your area.
IMPORTANT NOTE: Wolf Pro island hoods
must be vented to the outside. Use only metal
ductwork.
Refer to the illustration below for ducting
considerations for Pro island hoods.