Installing and replacing oven light – Waring CO900B User Manual
Page 22
Installing and Replacing Oven Light
A. Removing the Oven Light Cover
1. Insert a flat-blade screwdriver into the slot in the thumb
screw that holds the oven light cover
in place.
. Rotate the screwdriver counterclockwise to
remove the screw.
3. Remove the oven light cover.
B. Install or Replace the Oven Light
1. Use a 15W, clear appliance light bulb or phone
Waring Customer Service at 1-800-49-7464 to
order a light bulb.
C. Replace the Oven Light Cover
1. Insert the tab of the oven light cover into the slot
in the side of the oven light compartment.
. Insert the screw into the hole in the oven
light cover.
3. Holding the screw, push the oven light cover
towards the side of the oven until the screw enters
the screw hole.
4. Turn the screw clockwise by hand until the threads
start to engage.
5. Insert the screwdriver in the slot of the screw.
6. Tighten the screw by turning the screwdriver
clockwise.
Tab of Oven Light Cover
Slot of Oven Light Compartment
Oven Light Cover
Phillips Screw