Whirlpool DUET SPORT W10151580B - Manual (Page 5)

5
Installation clearances
The location must be large enough to allow the dryer door to
open fully.
Dryer Dimensions
*Most installations require a minimum 5" (127 mm) clearance
behind the dryer for the exhaust vent with elbow. See “Venting
Requirements.”
Installation spacing for recessed area or closet installation
The following spacing dimensions are recommended for this
dryer. This dryer has been tested for spacing of 0" (0 mm)
clearance on the sides and rear. Recommended spacing should
be considered for the following reasons:
Additional spacing should be considered for ease of
installation and servicing.
Additional clearances might be required for wall, door, and
floor moldings.
Additional spacing should be considered on all sides of the
dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable.
Companion appliance spacing should also be considered.
Custom undercounter installation - Dryer only
*Required spacing
Closet installation - Dryer only
*Required spacing
**For side or bottom venting, 0" (0 mm) spacing is allowed.
Recessed or closet installation - Dryer on pedestal
*Required spacing
**For side or bottom venting, 0" (0 mm) spacing is allowed.
36"
(914 mm)
27"
(686 mm)
*28.65"
(728 mm)
2"*
(50 mm)
36" min
(914 mm)
1"*
(25 mm)
1"*
(25 mm)
27"
(686 mm)
A. Side view - closet or confined area
B. Closet door with vents
A. Recessed area
B. Side view - closet or confined area
A B
14"max.*
(356mm)
15"min.*
(381mm)
1"*
(25 mm)
5"**
(127 mm)
28.65"
(728 mm)
48 in. 2 *
(310 cm 2 )
24 in. 2 *
(155 cm 2 )
3"*
(76 mm)
3"*
(76 mm)
A B
1"
(25 mm)
1"
(25 mm)
27"
(686 mm)
1"*
(25 mm)
5 "**
(127 mm)
28.65"
(728 mm)
15"min.*
(381mm)
14"max.*
(356mm)
50 1 ⁄
2 "
(1283 mm)