Windsor Recover 12 - Manual (Page 8)

8
English
Î Check cables, plugs, fuse, and socket.
Î Turn on the machine.
– Float is blocking the vacuum canal.
Î
Empty the dirt container.
Î Remove choking of vacuum nozzle,
vacuum tube, vacuum hose, or car-
tridge filter.
Î Exchange the paper filter bag.
Î Change cartridge filter.
Î Check the proper installation of the car-
tridge filter.
Î Change cartridge filter.
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the machine can be oper-
ated safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
Troubleshooting
Vacuum motor does not run
Vaccum motor is running but the
machine is not vacuuming in dust/
dirt
Vacuum capacity decreases
Dust comes out while vacuuming
Accessories and Spare Parts