Westinghouse SK-19H210S - Manual (Page 22)

20
3. HDTV/ACCESSORY SETUP
Connecting Your Personal Computer
Before making any connections, make sure all equipment is turned off.
Connection Types
• VGA
Connection
—Connect a 15-pin analog VGA cable (not supplied) from your
computer’s “VGA OUT” port to the HDTV’s “VGA” port
—Connect a stereo mini cable from your computer’s “AUDIO OUT” port
to the HDTV’s “AUDIO IN” port
• DVI-D
Connection
—Connect a Digital DVI-HDMI cable (not supplied) from your computer’s
“DVI-D OUT” port to the HDTV’s “HDMI” port
—Connect a stereo mini cable from your computer’s “AUDIO OUT” port
to the HDTV’s “AUDIO IN” port
Power
• Turn on your HDTV (wait a few seconds for it to power up)
• Turn on your computer
—The HDTV will automatically adjust to the computer’s resolution
Computer Settings
• For optimal picture quality, set your computer’s timing mode to VESA™
(Video Electronics Standards Association) 1440x900 at 60Hz
• Refer to your computer’s graphic card User Guide for directions to set
this timing mode.
• If using Microsoft Windows OS, please check its Display Properties.
20