White Rodgers 1F91W-71 - Manual (Page 24)

24
5. Press SET
DAY
once. The display will show the
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either TIME
FWD or TIME
BACK
until you
reach the current day of the week.
7. Press RUN
PRGM
once. The display will show the
correct time and room temperature alter-
nately.
Enter Heating Program
During programming, if you don’t press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume pro-
gramming after this happens, press VIEW
PRGM
until
you are at the point where you stopped program-
ming. Then you may continue to enter your
programs normally. If you want to stop program-
ming at any time, simply press RUN
PRGM
to resume
program operation.
1. Press SYSTEM
HEAT - OFF - COOL - AUTO
until HEAT is displayed.
2. Press VIEW
PRGM
once. 5 DAY (indicating week-
day program), and MOR, representing the
morning heating period, will appear in the
display. Also displayed are the currently
programmed start time for the MOR period
and the currently programmed tempera-
ture.
EXAMPLE:
5 DAY
This display window shows that for the
weekday MOR period, the start time is 5:00