Vizio TL-R480T - Manual (Page 42)

TL-R480T Enterprise Broadband Router User Giude
To add static routing entries:
1. Enter the following data:
Destination IP Address - The Destination IP Address is the address of the
network or host that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact
between the router and the network or host.
2. Click the Enable checkbox.
3. Repeat steps 1-2 until you are finished.
4. If you are finished. Click the Save button to save it.
To modify an existing entry:
1. Modify the entry’s Destination IP Address, Subnet Mask and Gateway.
2. Click
the Save button.
To delete an existing entry:
1. Select the entry as you desire and make all of its fields blank.
2. Click
the Save button.
To delete all the entries:
1. Click
the Clear All button.
2. Click the Save button.
Note
: You can set up to 8 entries.
5.9 DDNS
The router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you
assign a fixed host and domain name to a dynamic Internet IP address. It is useful when
you are hosting your own website, FTP server, or other server behind the router. Before
using this feature, you need to sign up for DDNS service providers such as
www.oray.net
or www.comexe.cn . The Dynamic DNS client service provider will give you a password
or key.
To set up for DDNS, follow these instructions:
5.9.1 Oray.net DDNS
If your selected dynamic DNS Service Provider is www.oray.net . The page shown in
figure 5-33 will appear:
- 38 -