VIEWSONIC G773 - Manual (Page 23)

16
E
N
G
L
I
S
H
ViewSonic G773
The following table lists the factory preset timings:
Factory Preset Timings
Note: Input timing should be within the horizontal and vertical frequency ranges in order to set the
screen size and position. Before registering a new signal, check its horizontal and vertical timing
specifications.
Note: The factory preset timing is registered when the difference between the user definable timing
and the factory preset timing is smaller than the allowable deviation; also, the polarity of their
synchronizing signals must be the same.
Resolution Horizontal Vertical Polarity of Syn-
Frequency Frequency chronizing Signal
Timing Pixels x Lines kHz Hz Horiz/Vertical
Ind. VGA 640x400@70Hz 640 x 400 31.47 70 -/+
Ind. VGA 640x480@60Hz 640 x 480 31.47 60 -/-
VESA 640x480@75Hz 640 x 480 37.50 75 -/-
VESA 800x600@75Hz 800 x 600 46.08 75 +/+
VESA 800x600@85Hz 800 x 600 53.67 85 +/+
VESA 1024x768@75Hz* 1024 x 768 60.02 75 +/+
VESA 1024x768@85Hz 1024 x 768 68.68 85 +/+
VESA 1280x1024@60Hz 1280x1024 60.01 60 +/+
MAC 640x480@67Hz 640 x 480 35.00 67 -/-
MAC 832x624@75Hz 832 x 624 49.73 75 -/-
* Recommended setting for this monitor.
Operation