Adding new handsets – VTech USB 7100 User Manual
Page 27
25
Appendix
Adding new handsets
Your telephone can accommodate up to 4 cordless
handsets. You can add new handsets (sold separately)
at any time.
Before using a new handset, you must first install and
charge the batteries for 15 hours (see page 7).
After the batteries are fully charged, follow the pro-
cedure below to register the handset to the base.
1
1 Select
MENU
.
2
2 Highlight "Register," then select O
OK
K. The screen
will display, "Search Base".
3
3 Press and hold the
LOCATE HANDSET
button on the
base for at least 30 seconds.
4
4 The handset should beep to indicate the registra-
tion has completed. You will be prompted to
enter a name for the new handset (see page 17 for
help in entering names). We strongly recommend
that you give each handset a distinctive name, to
simplify paging and intercom use.
5
5 Select O
OK
K to save the new handset name. The
name you enter will be displayed on screen when
the handset is idle, and in intercom paging lists.
If the above procedure does not work, see page 29
for further suggestions.
NOT REGISTERED
MENU
Press
MENU
to begin
SEARCH BASE
1 > REGISTER
2 DEREGISTER
OK
HANDSET NAME
PAT_
OK
PAT
INTERCM
MENU