VTech USB 7100 - Manual (Page 15)

13
Telephone Operation
Options while on calls
Volume controls
L Liisstte en niin ng g v vo ollu um me e:: Press VOLUME repeatedly to adjust
volume. You’ll hear 3 beeps at maximum volume;
the next button press returns to minimum volume.
R Riin ng giin ng g v vo ollu um me e ((tte em mp po orra arry y)):: While the phone is
ringing, press VOLUME to adjust ringer volume, or press
OFF to silence the ringer. (See page 15 to change this
setting permanently.)
Mute
Select MUTE to silence the microphone during a call.
Your caller will not be able to hear you until you
select
MUTE again and resume speaking.
Call waiting (standard calls only)
If you have Call Waiting service, you’ll hear a beep if
someone calls while you are already on a call. Press
FLASH to put your current call on hold and take the
new call. You can press FLASH at any time to switch
back and forth between standard calls.
Switching between Internet & standard calls
During a call you can press the non-active CALL but-
ton to put your existing call on hold and make or
answer a call on the other line. Press the non-active
CALL button to switch back and forth between calls.
Select OFF to terminate the active call. This will auto-
matically switch you to the call on the other line.
Intercom page during a call
If you receive an intercom page during a call, you
can ignore it, or press
INTERCM to take the intercom
call and put your outside call on hold. Press the
flashing
CALL button to resume your external call.
Using other functions during a call
Your call is automatically put on hold if you use the
Phonebook, Call Log or Redial functions. Press the
flashing
CALL button to resume your call.
MICROPHONE MUTED
INTERCM MUTE
3335559876 ON
PAT JONES > HELD
INTERCM MUTE
Press to
switch to
Internet call Press to
switch to
standard call
VOLUME
* * _ _
Volume level (1-4)